RT9-48V/1.4kW Rectifier Specification
Rectifier Technologies Pacific Page 5 of 6
18 Joseph Street, Blackburn North,
Victoria 3130 Australia 25/03/2010
http://www.rtp.com.au 950-1712-05 RT9 48V-1.4kW.doc
Environmental
Environmental Class (EN 300 019):
Operational: Class 3.3
(Stationary Use at Non-Temperature-Controlled Locations)
Transport: Class 2.3
(Public Transportation)
Storage: Class 1.2
(Weather Protected Non-Temperature-Controlled Locations)
Cooling:
Forced convection cooling using two 40mm fans
with variable speed temperature control and finger
guards. The RT9 draws cool air from the front and
exhausts warmed air to the back. Fans stop if AC
power fails or rectifier inhibited remotely.
Temperature:
Operating range: -40°C to +70°C
Full power range: -40°C to +50°C
Derated operation: 50% power at +70°C
Storage: -40°C to +60°C
Transport: -40°C to +70°C
The rectifier senses its internal heat-sink
temperature and, if necessary, adjusts power limit
in order to protect itself against over-heating;
Humidity:
0 to 100% RH condensing including dripping water
and icing conditions.
Altitude:
Operational to 4000m.(Consult factory above 4km)
Derate maximum ambient temperature by 5°C per
1000m above sea level.
Vibration:
Operational: 1.5mm displacement 2-9Hz,
5m/s
2
acceleration 9-200Hz,
Continuous, any direction.
Transport: 3.5mm displacement 2-9Hz,
(packaged) 10m/s
2
acceleration 9-200Hz,
15m/s
2
acceleration 200-500Hz,
One hour, any direction.
Shocks:
Operational: 40m/s
2
half sine, 11ms duration,
Any direction
Transport: 180m/s
2
half sine, 6ms duration,
(packaged) Any direction
Drop Test:
Transport: 1.2m drop when packaged
Mechanical
Module Size:
Width: 216mm (8.5”)
Height: 43mm (1U) (1.7”)
Depth: 255mm (10”)
Mass: < 2.3kg (5.1 lb)
Acoustic Noise:
< 55dB (A Weighted)
Magazine Size:
Standard Powershelf magazine may be installed in
400 or 600mm deep 19-inch or 23-inch racks.
Various combinations of number of SMRs and
types of peripheral equipment are available on a
customer request.
Special magazine is required for 300mm deep
racks.
Connections
Input, Output, and Communications:
A multifunction hot-plug connector is mounted on the back of the rectifier module that carries the AC, DC and
communications lines. A matching connector is located at the back of the magazine. Reliable mating is
ensured by a spring latch in the magazine that mechanically secures the rectifier.
(44 strony)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji